Long lasting comfort
The BABY-SAFE 3 i-SIZE can be used from birth up to 15 months and provides cosy comfort at all times. The newborn insert ensures ergonomic safety for the newborn babies, while the patented integral lie-flat recline mechanism provides the most ergonomic position according to your baby's height, and the headrest can be adjusted to allow for more space as your baby grows.
Freedom through compatibility
The BABY-SAFE 3 i-SIZE easily clicks onto the FLEX BASE iSENSE as well as a wide range of pushchairs*. Lifting and re-installing the BABY-SAFE 3 i-SIZE is quick and easy, allowing you to enjoy seamless freedom on the go.
*Additional adapters needed
Turn for easy access – the rotatable base
Seating and harnessing your little one is quick and easy: Just turn the BABY-SAFE 3 i-SIZE to towards the open car door when it is installed on the FLEX BASE iSENSE. This makes transitions between car rides and walks with a pushchair much more comfortable.
.jpg)
Lie-flat technology
Allows for a more comfortable and more ergonomic position for newborns. Our patented integral recline mechanism allows you to adjust the flatness of the lying position according to the child’s height. The position changes automatically when adjusting the headrest, increasing the space to suit your child’s development. The shoulder straps also adjust automatically when adjusting the headrest.
Newborn insert
Especially designed to give extra support to small babies. The included newborn insert with energy-absorbing foam pads reduces the space and offers additional comfort.
Modular Base system
The modular FLEX BASE iSENSE is compatible with the BABY-SAFE iSENSE, the BABY-SAFE 3 i-SIZE, and the DUALFIX iSENSE / DUALFIX 3 i-SIZE.
Adjustable rebound bar
The rebound bar not only helps to prevent the child car seat from tilting in an impact, but can also be adjusted by an entire 8 degrees. This allows you to easily adjust the rebound bar to the backrest of the vehicle seat and gives your child 10% of additional leg space.
Adjustable angle optimisation
In cars with inclined vehicle seats, there may be a risk of your child's head tipping forward especially when they fall asleep in a car seat. With our FLEX BASE iSENSE you can easily adjust the angle of the car seat to six different positions, to provide a more ergonomic yet safe position of your child during any journey and in any car.
Easy release with CLICK & GO® adapters
The infant carrier can easily be taken off the base or pushchair so parent can remain in an ergonomic, upright position while lifting the carrier up. Simply use the handle at the back of the infant carrier to unlock it from the base or pushchair and lift it off with ease.
Smart and adjustable support leg
The support leg provides extra stability for the infant carrier base via the vehicle floor. It minimises the tilting and rotational movement and reduces the forward movement forces exerted on your child in a crash situation, helping to protect them. For a secure installation, the support leg can be adjusted to suit the height that’s best for your car. The easy-to-read indicator shows you when the support leg is positioned firmly on your vehicle’s floor, changing from red to black when correctly installed. Additionally, the support leg will notify you with a sound if not correctly installed.
The Britax Römer Pivot Link ISOFIX System
In case of an impact, our patented Pivot Link ISOFIX System directs the force first downward (1), into the vehicle seat, and then forward (2), more gently – greatly reducing the risk of head and neck injury for your child.
ISOFIX ratchet system
The ISOFIX ratchet system allows the ISOFIX arms to extend so you can easily fit or remove the infant carrier base from the ISOFIX anchorage points in the car. Once the ISOFIX connectors are engaged, push the base until it touches the back of the vehicle seat. This prevents the infant carrier from lifting upwards in case of an impact.
5-point harness
We believe a 5-point harness is the safest way to secure your child in a car seat because it keeps your child safe and tight in the seat’s protective shell. In the event of a collision, the harness distributes the forces of the impact across 5 points, two at the shoulders, two at the hips and one where the harness buckles between the legs. This helps to protect your child from all directions of impact.
Easy adjustable headrest and harness
Our padded headrest and harness can easily be adjusted with one hand to suit your child’s height. Before you secure your little one in the harness, check to make sure the headrest is in the correct position – just above its shoulders.
Adjustable handle
The adjustable handle allows you to easily move it to the back and place your child in the infant carrier. Simply press the buttons on each side of the handle to unlock and move it. When the carrier is placed on the floor, we recommend folding the handle back completely to prevent rocking.
Easy storage
We know that parents of young children have lots of baby items to store so we have designed the infant carrier base with convenient storage in mind. The support leg folds up so you can easily pack it away in your car’s boot or at home. By folding the leg under the seat this also deactivates the security beep from the support leg to provide a peaceful storage solution.
Sun canopy
The sun canopy offers protection for your child from the sun (UPF 50+) and wind both in the car and on the pushchair. The attachment points are conveniently located on the sides of the handle so you can carry the infant carrier while the sun canopy is in use.
Audible click to indicate correct installation
When installing the infant carrier on the FLEX BASE iSENSE in the car or on the pushchair, a clear audible click informs you the seat is safely installed.
Installation
For those moments when your baby is fast asleep and you need to either take them out or put them in the car without disturbing them, you’ll really appreciate our infant carrier bases. While the base is fitted in the car, you can easily attach or remove the infant carrier with one simple click, without hassle and without disturbing your baby. BABY-SAFE 3 i-SIZE BUNDLE specific requirements – a safe installation is completed with the use of a support leg to allow optimum stability. Our i-Size bases will fit all i-Size approved seating positions, so please check your vehicle owner's manual for i-Size approved seating positions in your car.
For those moments when your baby is fast asleep and you need to either take them out or put them in the car without disturbing them, you’ll really appreciate our infant carrier bases. While the base is fitted in the car, you can easily attach or remove the infant carrier with one simple click, without hassle and without disturbing your baby. BABY-SAFE 3 i-SIZE BUNDLE specific requirements – a safe installation is completed with the use of a support leg to allow optimum stability.
This child car seat can be installed with the car's 3-point seat belt. This option is handy if you will be transferring the car seat to different cars which may not all have ISOFIX anchorage points. Seat belt guides on the car seat will help you install the seat correctly. Check the vehicle owner's manual for suitable seating positions and ask your local retailer for a test installation in your car (please ask for a member of staff trained by Britax Römer), before you buy the car seat.
During active days away from home or in the car, you can make it easier to get around by placing the baby carrier on a pushchair. Just take the baby car seat with your baby out of the car, attach it securely to the stroller - and it's ready!
