The Peg Perego 2-3 Shuttle Plus seat is designed for older children from 3 to about 12 years of age with a weight from 15 to 36 kg. Thanks to multi-faceted adjustments it can be adapted to the needs of children with a height of up to 150 cm. It is mounted forward facing using the ISOFIX system or a car seat belt. The backrest and shoulder width can be adjusted in 3 different positions. You can also choose from 5 headrest heights. For your child's comfort, the seat also includes armrests and a cup holder. One of the biggest advantages of the peg perego 2-3 shuttle plus seat is the possibility to detach the backrest and use only the booster, which is possible for children between 120 and 150 cm tall.
Universal installation in any car
The peg perego 2-3 shuttle plus seat is installed in the car with the use of the ISOFIX system. It ensures a stable installation. If the vehicle is not equipped with this type of connectors, alternatively the car seat can be fastened with the car belt. So it fits into every car model.
The seat grows with the child. It is dedicated for both 3 and 12-year-olds, so the difference in height is large. You can set the headrest at 5 different heights - pay attention that it is positioned just above your child's shoulders. The back and shoulder width can be set by means of a 3-level adjustment.
The seat backrest can be removed to increase space on the back seat. However, this is only possible when the child is over 120 cm tall. Until then, the child should travel in the complete seat - with the backrest and side walls that are equipped with EPS protection.
The seat can always be clean and fresh. The upholstery can be removed and washed at any time. It should be washed in a washing machine at 30°C, thus removing both dirt and allergens.
up to 10-12 years (150cm)
Weight group (ECE R44/04 approval)
15-36 kg (Group 2/3)
Method of installing
Car seatbelts or ISOFIX system
ADAC rating (for safety) rearward facing
ADAC rating (for safety) facing the driving direction
ADAC rating (for safety) with an additional base
Reversible seat (by detaching from the base)
Additional side protection
Top Tether required
Additional installing system
Backrest width adjustment
Along with the height of the headrest
Seat tilt adjustment
Harness belts type
Harness height adjustment
After accident replacement
Country of origin
Approved for use on the plane
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.